Holzapfel B., Hanisch J., Sailer B., Thoener M., Schlenga K., Abaecherli V., Kauffmann-Weiss S., Buehler C., Wanior M., Heilmaier M.
Ключевые слова: HTS, YBCO, coated conductors, fabrication, PLD process, thermal performance, temperature dependence, cooling technology, IBAD process, long conductors, high field tests, critical caracteristics, critical current, flux density, mechanical properties, bending radius, defects, current-voltage characteristics, thickness dependence, distribution, ex-situ process
Bottura L., Usoskin A., Goldacker W., Rossi L., Larbalestier D., Senatore C., Rutt A., Ballarino A., Prause B., Schlenga K., Abraimov D., Kario A., Meledin A., Betz U., Hofacker F.
Ключевые слова: textile machines, microstructure, nanoscaled effects, long conductors, thickness dependence, distribution, critical caracteristics, critical current, flux density, helium, n-value, homogeneity, self-field effect, experimental results, HTS, coated conductors, width, geometry effects, assembled conductors, YBCO, PLD process, fabrication, doping effect, substrate stainless steel
Zhang Y., Sailer B., Boutboul T., Parrell J., Thoener M., Schlenga K., Abaecherli V., Readman P., Viladiu E., Hampshire D., Berger G., Raine M.
Ключевые слова: ITER, coils toroidal, LTS, Nb3Sn, strands, cable-in-conduit conductor, fabrication, comparison, critical caracteristics, critical current, n-value, RRR parameter
Bottura L., Larbalestier D.C., Scheuerlein C., Tarantini C., Sailer B., Bordini B., Ballarino A., Thoener M., Schlenga K., Lee P.J., Segal C., Sung Z.H.
Ключевые слова: MgB2/Cu-Ni, in-situ process, precursors, bulk, PIT process, wires multifilamentary, microstructure, fabrication, grain size, resistivity, critical caracteristics, Jc/B curves
Bottura L., Usoskin A., Selvamanickam V., Polyanskii A., Rossi L., Senatore C., Rutt A., Dietrich R., Ballarino A., Schlenga K., Jaroszynski J., Abraimov D., Viouchkov Y.L., Barth C., Santos M., McCallister J., Francis A., Majkic G.S.
Ключевые слова: HTS, YBCO, coated conductors, composition, local distribution, defects, pinning centers, doping effect, lattice parameter, substrate Ni-Cr, IBAD process, PLD process, microstructure, fabrication, critical caracteristics, critical current density, critical current, angular dependence, magnetic field dependence, experimental results
Bottura L., Usoskin A., Larbalestier D., Senatore C., Rutt A., Dietrich R., Kirchhoff L., Schlenga K., Selvamanikam V., Abraimov D.
Ключевые слова: deposition setup, presentation, HTS, YBCO, coated conductors, long conductors, PLD process, buffer layers, texture, fabrication, critical caracteristics, critical current, uniformity, fluctuations, magnetic field dependence, temperature dependence, microstructure, percolation characteristics, width, length
Ключевые слова: patents, coils, multilayered structures, winding configurations, experimental devices
Kvitkovic J., Usoskin A., Rutt A., Steurer M., Pamidi S., Schlenga K., Withnell T., Graber L., Chiocchio T.
Ключевые слова: FCL inductive, shields, HTS, YBCO, coated conductors, critical caracteristics, current-voltage characteristics, impedance, quench, joints, mechanical properties, recovery characteristics, IBAD process, PLD process, fabrication, deposition setup, critical current, magnetic field dependence, homogeneity, economic analysis, presentation
Ключевые слова: presentation, HTS, YBCO, coated conductors, IBAD process, PLD process, fabrication, deposition setup, high rate process, stabilizing layers, economic analysis, mechanical properties, tensile tests, stress effects, bending process, cables, FCL resistive, critical caracteristics, critical current, strain effects, Jc/B curves, laminations, ac losses, quench properties, review, power equipment
Ключевые слова: coated conductors, current leads, FCL, insulation, wires multifilamentary, PLD process, IBAD process, HTS, presentation, YBCO, Bi2223/Ag, power equipment, fabrication
Ключевые слова: MRI magnets, magnets, cryogenic systems, patents, medical applications, resonance effects
Ключевые слова: presentation, HTS, YBCO, coated conductors, IBAD process, PLD process, high rate process, deposition setup, stabilizing layers, economic analysis, fabrication, length
Ключевые слова: patents, HTS, LTS, hybrid systems, coils, winding configurations, design, power equipment
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.